nbmsupply
KOMILFO PIGMENT EFFECT UNICORN RAINBOW 001 COARSE GRIND, 1 G 886500
KOMILFO PIGMENT EFFECT UNICORN RAINBOW 001 COARSE GRIND, 1 G 886500
Couldn't load pickup availability
Application method:
1. Cover nails with base and gel polish, cure in a lamp.
2. The pigment can be rubbed into the gel polish without PM (if the gel polish is with a sticky layer, remove the sticky layer, if the gel polish is without a sticky layer, immediately start applying the pigment) or into the top without the sticky layer.
3. The surface of the nails should be perfectly flat. Otherwise, align with the top (use a top without HP, if the top is with a sticky layer, remove the HP first) and start applying the pigment. If, after applying the gel polish, alignment with the top is not required, then you can immediately rub it into the gel polish.
4. Apply the pigment with a brush or finger and rub in until shine (you can use a foam or silicone brush). In difficult areas, near the cuticle and lateral ridges, use a silicone or other brush. Be sure to brush off excess pigment with a soft brush.
5. Pass the buff along the butt-end of the nails.
6. Apply Rubber Base Komilfo or Komilfo Gel Base or any other rubber base (if the base is liquid there is a possibility of chipping), sealing the free edge of the nail plate. Cover with top.
The quality of pigments is different and all stages of work depend on it. In order to get a mirror effect, the pigment must be rubbed into the top without a sticky layer. The drying time of the top depends on the lamp and the quality of the pigment. On average 30 seconds, the pigment is rubbed into the hot top. But also do not overdry the top, the pigment will grain!
⠀
You can rub in the pigment either with your finger or with a silicone brush (the brush is ideal for rubbing the pigment). For fixing with a file or buff, we butt-cut the free edge.
⠀
There are also several options for how and what to overlap:
- apply ultrabond to the entire nail plate + top (we process the ends well)
- overlap with two layers of a top with a sticky layer (don’t forget about the ends)
- base + top (using X-Base Komilfo, the pigment does not cloud under it)
Materials
Materials
Shipping & Returns
Shipping & Returns
Dimensions
Dimensions
Care Instructions
Care Instructions



