KOMILFO ACRYGEL №001 CLEAR, 30 ml
- Low stock - 5 items left
- Inventory on the way
Komilfo Acryl Gel is a new nail modeling system that combines the best properties of gel and acrylic systems and saves from the shortcomings of both systems.
Komilfo acrylic gel application technology:
1. Carry out standard nail preparation: remove the previous coating, remove the cuticle, buff the surface and give the desired shape to the nails. Then it is recommended to clean the nail plate with a disinfectant and degreaser.
2. Apply an acid primer on the nail plate and let it dry for 2 minutes.
3. Take the forms for building, you should adjust them under the nail plate, fix them. You can not use the form for building, and immediately model the nail.
4. Dial the required amount of Acryl Gel you can with a pusher or brush. Make the calculation of acrylic gel Comilfo brush with acrylic or gel abundantly soaked in the cleaner.
5. Clamp the arch using a clamp if necessary.
6. Dry in a lamp, in a UV lamp with pressing the arch for 1 minute, squeeze the arch and dry for another 1 minute. Without pressing, 2 minutes, in LED lamps and hybrid lamps - 60 seconds.
7. Do sawing, give the form of a soft saw 150 or 180 grit.
8. cover with a top for a gel varnish covering, or put color gel varnish, dry and then cover with a top.
9. Acryl Gel is removed by milling and soaking with a remover to remove gel polish
Komilfo acrylic gel application technology:
1. Carry out standard nail preparation: remove the previous coating, remove the cuticle, buff the surface and give the desired shape to the nails. Then it is recommended to clean the nail plate with a disinfectant and degreaser.
2. Apply an acid primer on the nail plate and let it dry for 2 minutes.
3. Take the forms for building, you should adjust them under the nail plate, fix them. You can not use the form for building, and immediately model the nail.
4. Dial the required amount of Acryl Gel you can with a pusher or brush. Make the calculation of acrylic gel Comilfo brush with acrylic or gel abundantly soaked in the cleaner.
5. Clamp the arch using a clamp if necessary.
6. Dry in a lamp, in a UV lamp with pressing the arch for 1 minute, squeeze the arch and dry for another 1 minute. Without pressing, 2 minutes, in LED lamps and hybrid lamps - 60 seconds.
7. Do sawing, give the form of a soft saw 150 or 180 grit.
8. cover with a top for a gel varnish covering, or put color gel varnish, dry and then cover with a top.
9. Acryl Gel is removed by milling and soaking with a remover to remove gel polish
